To setup RSS devices (only for VRX010/020.  Newer devices use Web URLs):

• RSS URL   (single feed)
  • Set Enabled = On
  • Set Type = RSS URL
  • Set Static IP = 0.0.0.0
  • Set Port = 9091
  • Set Profile = On
  • Set Stream 1 = On
  • Set Multicast = URL
  • Set URL = the RSS URL
  • Custom args:  The following options can be used
    • -d #    Max time to display each message
    • -b       Only repeat items at given interval (default is 5 min)
    • -i #     Interval in seconds to repeat

 

• RSS file   (file listing several RSS feeds to join)
  • Set Enabled = On
  • Set Type = RSS file
  • Set Static IP = 0.0.0.0
  • Set Port = 9091
  • Set Profile = On
  • Set Stream 1 = On
  • Set Multicast = URL
  • Set URL = Mounted network path to this file (as seen by the decoder).  Mounted NFS shares will start with /mnt/nfs.  Mounted samba shares with /mnt/samba.  You can also link DIRECTLY to files on samba NAS drives by using smb://NAS_IP_ADDR/SHARE_NAME/file_path_on_nas.  This method will simplify setup because you do not need to setup the network share mount on each VRX device.
  • Custom args:  The following options can be used
    • -d #    Max time to display each message
    • -b       Only repeat items at given interval (default is 5 min)
    • -i #     Interval in seconds to repeat